|
Post by DaveSmith on Dec 4, 2009 16:56:32 GMT -5
How do I reset the "Maint Reqd" light located on the instrument panel?
This procedure should be used to reset the light when maintenance has been performed: 1) Turn ignition switch to the ON position. 2) Set the Odometer/Trip Display to the ODO mode 3) Turn the ignition switch to the OFF position. 4) Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 5) The Service Maintenance Reminder Light will: a. Illuminate solidly for 3 seconds. b. Blink for 2 seconds. c. Illuminate solidly for 1 second. d. Turn off. 6) Release the Trip Meter RESET button. 7) Turn the ignition to the OFF position. 8) Turn the ignition to the ON position, and confirm that the Service Maintenance Reminder Light goes out. NOTE: If the light continues blinking in step 5a, turn the ignition off, and repeat the procedure from step 1.
|
|